DIY Pellet Trap for Air Rifle Targets

I recently designed a Pellet trap to test my father’s old Diana Mod.24 .177″ rifle’s accuracy after I serviced it with a new spring and piston seal.

My Own CAD Design using LibreCad can be downloaded in PDF format below.

CAD Design.pdf

 

 

20160702_215517
CAD Plans
20160702_212015
Material – A shelf from an old storage rack
20160702_215334
Side Marked for Cutting
20160702_213908
Back and Bottom Plates
20160703_151442
After cleaning up the rust and welding
20160703_151428
Front (Upside down)
20160703_151434
Sides
20160710_152717
After fixing spoons, and aluminum curtain rails to hold target sheets. Spoons took some hits during testing
20160710_152727
More spoon damage and trapped pellets
20160710_152835
10m Targets fitted
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s